SSOT v3.7 · Project Reference · Acoustic Design Basis

Control Room Desk Layout

Joinery reference for the Control Room desk, monitor shelf, and under-desk cable routing. Equipment footprints and ergonomic heights are fixed to support the monitoring geometry and rack landing paths.

Main Wing
160 × 75 cm
Return Wing
90 × 60 cm
Desk Height
75 cm AFF
Monitor Center
120 cm AFF

Drawing 1 — Top View

Plan Geometry

Main Desk and Return Wing

Main wing 160 × 75 cm with central control surface arrangement and 90 × 60 cm return wing for secondary monitor and patch access.

Monitor shelf 160 × 25 cm (+20 cm) SSL UF8 48.3 × 37 cm SSL UF1 14 × 37 cm Apollo x4 Under shelf LG 27UK850-W LG 27UK850-W Main wing Return wing Secondary monitor Top of return wing Patch bay access panel Cable entry 160 cm main wing width 90 cm return wing width 75 cm desk depth Monitor shelf width 160 cm Shelf monitors centered at 68% depth = 1.54 m from desk front Mouse / keyboard zone to right of UF1

Drawing 2 — Side Elevation

Ergonomic Heights

Desk + Monitor Shelf Section

Monitor bottom at 95 cm AFF, monitor center at 120 cm AFF, and desk surface fixed at 75 cm AFF.

Monitor 75 cm AFF desk 95 cm AFF monitor bottom 120 cm AFF monitor center Monitor shelf +20 cm above desk Apollo x4 mounted under shelf, left of center

Drawing 3 — Cable Management

Joinery Coordination

Under-Desk Routing

Full-width tray under the main wing with four grommets, left-side power bar, and cable exits to floor and rack landing.

Full-width cable tray 4 cable entry grommets Power bar Cable exit to floor Cable exit to rack
ElementRequirement
Main wing trayFull width under-desk tray for audio, data, and monitor loom separation
Grommets4 entries equally spaced along the main work surface
Power barMount left under tray to keep mains clear of control surfaces
Floor exitDirect drop for local power and audio lines
Rack exitRight-side horizontal chase to Apollo / patch bay rack landing